Quadrocopter's Heavy Lifter Motor Mount was created for the CineStar X8/COAX platform. This single motor mount is typically used as the top plate and has 2.5mm diameter holes for the mounting bolts. It does not include or utilize the press nuts. For use with, but not limited to, the navigator motor series from Tiger, DualSky, and KDE motors. This mount will accommodate motors with a bolt pattern diameter from 22mm to 36mm.
1) Carbon fiber motor mount plate
Loctite 222MS Threadlocker »
(2x) CineStar Frame Clamps »
(4x) M3x6 Screws