The GD-6(Hexa) Frame Kit with 1000mm motor to motor diameter is one of the regular sized frame kits that we offer.
Each boom can be disconnected by removal of 4 screws for easy transportation.
The GD-6 can be build with powerful motors and is perfectly suited for your heavy lift platform. We recommend the GD-8 or GD-12 if you plan on flying with a camera the size and weight of a RED Epic.
up to 18 inch, 15-17 inch recommended
240mm x 240mm
Canon 5D / Canon C100 / Sony FS700 / Panasonic GH3
8+ lbs. depending on motor setup
MikroKopter FlightCTRL 2.5 or DJI A2
MikroKopter ESC's or similar 40A+ ESC (Freefly or Castle Creations)
6s LiPO with 8000+mAh
Suitable Camera Gimbals:
- Freefly Systems: MoVi MR, 2 and 3 axis Cinestar gimbal
- Photo Higher: Pro Mount 200, Halo 2000
- DJI Zenmuse Z15
3 X Inner Arms
6 X Outer Arms
1 X TOP Center Plate
1 X Bottom Center Plate
2 X Battery Tray
1 X GPS Plate
3 X Boom Clamp Set
15 X Cross Member
8 X Hub Connector
6 X Motor Mount Assembly
1 X Rail Mount Assembly
4 X Velcro Battery Strap
Landing Gear, Motors and Electronics are not included in this frame kit. Please contact us if you have any questions.
GD-6 Assembly Instructions